Search results for "feedback control"

Internal model-based feedback control design for inversion-free feedforward rate-dependent hysteresis compensation of piezoelectric cantilever actuat…

2018

Abstract This study proposes a new rate-dependent feedforward compensator for compensation of hysteresis nonlinearities in smart materials-based actuators without considering the analytical inverse model. The proposed rate-dependent compensator is constructed with the inverse multiplicative structure of the rate-dependent Prandtl–Ishlinskii (RDPI) model. The study also presents an investigation for the compensation error when the proposed compensator is applied in an open-loop feedforward manner. Then, an internal model-based feedback control design is applied with the proposed feedforward compensator to a piezoelectric cantilever actuator. The experimental results illustrate that the propo…

Adaptive Neural Control of MIMO Nonstrict-Feedback Nonlinear Systems with Time Delay

2016

In this paper, an adaptive neural output-feedback tracking controller is designed for a class of multiple-input and multiple-output nonstrict-feedback nonlinear systems with time delay. The system coefficient and uncertain functions of our considered systems are both unknown. By employing neural networks to approximate the unknown function entries, and constructing a new input-driven filter, a backstepping design method of tracking controller is developed for the systems under consideration. The proposed controller can guarantee that all the signals in the closed-loop systems are ultimately bounded, and the time-varying target signal can be tracked within a small error as well. The main con…

A Comparison Study of a Novel Self-Contained Electro-Hydraulic Cylinder versus a Conventional Valve-Controlled Actuator—Part 1: Motion Control

2019

This research paper presents the first part of a comparative analysis of a novel self-contained electro-hydraulic cylinder with passive load-holding capability against a state of the art, valve-controlled actuation system that is typically used in load-carrying applications. The study is carried out on a single-boom crane with focus on the control design and motion performance analysis. First, a model-based design approach is carried out to derive the control parameters for both actuation systems using experimentally validated models. The linear analysis shows that the new drive system has higher gain margin, allowing a considerably more aggressive closed-loop position controller. Several b…

Vibration control strategy for large-scale structures with incomplete multi-actuator system and neighbouring state information

2016

The synthesis of optimal controllers for vibrational protection of large-scale structures with multiple actuation devices and partial state information is a challenging problem. In this study, the authors present a design strategy that allows computing this kind of controllers by using standard linear matrix inequality optimisation tools. To illustrate the main elements of the new approach, a five-story structure equipped with two interstory actuation devices and subjected to a seismic disturbance is considered. For this control setup, three different controllers are designed: an ideal state-feedback H 8 controller with full access to the complete state information and two static output-fee…

Comparison of KVP and RSI for Controlling KUKA Robots Over ROS

2020

In this work, an open-source ROS interface based on KUKAVARPROXY for control of KUKA robots is compared to the commercial closed-source Robot Sensor Interface available from KUKA. This comparison looks at the difference in how these two approaches communicate with the KUKA robot controller, the response time and tracking delay one can expect with the different interfaces, and the difference in use cases for the two interfaces. The investigations showed that the KR16 with KRC2 has a 50 ms response time, and RSI has a 120 ms tracking delay, with negligible delay caused by the ROS communication stack. The results highlight that the commercial inferface is more reliable for feedback control tas…

Flexible switching of feedback control mechanisms allows for learning of different task dynamics.

2013

To produce skilled movements, the brain flexibly adapts to different task requirements and movement contexts. Two core abilities underlie this flexibility. First, depending on the task, the motor system must rapidly switch the way it produces motor commands and how it corrects movements online, i.e. it switches between different (feedback) control policies. Second, it must also adapt to environmental changes for different tasks separately. Here we show these two abilities are related. In a bimanual movement task, we show that participants can switch on a movement-by-movement basis between two feedback control policies, depending only on a static visual cue. When this cue indicates that the …

Out‐of‐Equilibrium (Supra)molecular Systems and Materials: An Introduction

2021

Teaching process control in food engineering: dynamic simulation of a fermentation control process

2017

Abstract Students usually have difficulties to understand abstract concepts of process control. Implementing in teaching process the inquiry-based learning helps students to follow methods and practices similar to those of professional scientists in order to construct knowledge. The paper describes the steps reached in simulation-based learning: from experimental data obtained by the students in their practical method (study and measurement of variables to some fermentation processes) to the simulated the behaviour of the process under a feedback control system. By providing opportunities for students to check their understanding and reflect on their learning process performance is enhanced…

Spark ignition feedback control by means of combustion phase indicators on steady and transient operation

2014

In order to reduce fuel cost and CO2 emissions, modern spark ignition (SI) engines need to lower as much as possible fuel consumption. A crucial factor for efficiency improvement is represented by the combustion phase, which in an SI engine is controlled acting on the spark advance. This fundamental engine parameter is currently controlled in an open-loop by means of maps stored in the electronic control unit (ECU) memory: such kind of control, however, does not allow running the engine always at its best performance, since optimal combustion phase depends on many variables, like ambient conditions, fuel quality, engine aging, and wear, etc. A better choice would be represented by a closed-…

Sequential design of multioverlapping controllers for structural vibration control of tall buildings under seismic excitation

2012

In this article, a computationally effective strategy to obtain multioverlapping controllers via the inclusion principle is applied to design a state-feedback multioverlapping linear-quadratic regulator controller for a 20-story building. The proposed semidecentralized controller only requires state information of neighboring stories to compute the corresponding control actions. This particular information exchange configuration allows introducing a dramatic reduction in the transmission range required for a wireless implementation of the communications system. More specifically, just a one-story transmission range is required by the proposed multioverlapping controller, while a full-buildi…